- 01 Oct 2021
- 1 Minute to read
- Print
- DarkLight
- PDF
About PICO-IMX6UL/ULL
- Updated on 01 Oct 2021
- 1 Minute to read
- Print
- DarkLight
- PDF
Introduction
The PICO-IMX6UL and PICO-IMX6ULL are System on Modules (SOMs) based on an NXP i.MX6UL and i.MX6ULL SOCs with 1 Cortex™ A7 processors clocking up to 528 MHz (i.MX6UL) and 900GHz (i.MX6ULL). It operates in both commercial and industrial temperature ranges from -40 to 85°C. The SOC can drive either a parallel RGB display interface. The PICO-IMX6UL and PICO-IMX6ULL are members of the TechNexion “PICO pin-to-pin” product family, providing scalable embedded solutions with industrial interfaces such as RMII, USB, I2S, UART, SPI, I2C, PWM, GPIO for sensors for IIoT edge devices. Accelerate your time-to-market and reduce development costs with TechNexion pre-certified FCC / IC / CE / RCM / TELEC dual-band Wi-Fi 802.11 ac/a/b/g/n, Bluetooth. Linux, Yocto, Android runtime images and full source code available.
PICO-IMX6UL
Technical Documentation
Hardware manuals, baseboard schematics, mechanical drawings and models, and more are available on the PICO-IMX6UL product page.
Block Diagram
Features
Core System | |
---|---|
Processor | NXP i.MX6UL or i.MX6ULL |
Architecture | ARM Cortex-A7 |
PMIC | NXP PF3000 |
Memory | Upto 1GB DDR3L |
Storage | 4GB e.MMC |
Board to Board Connector | Hirose 70-pin Connectors x3 |
Connectivity | |
Network LAN | RMII |
Wireless LAN | Qualcomm Atheros QCA9377 Wi-Fi 5 – 802.11 a/b/g/n/ac (optional) |
Bluetooth | Qualcomm Atheros QCA9377 Bluetooth (optional) |
Antenna | MHF4 connector (optional) |
Signaling | |
I/O | RMII, RGB TTL, USB, USB OTG, I²S, CAN, UART, SPI, I²C, PWM, GPIO |
Video | |
GPU Engine | Image re-sizing / rotation / overlay and CSC Pixel Processing Pipeline |
Audio | |
Audio Codec | On carrier board |
Audio Interface | I²S (1 channel) |
Power Specifications | |
Power Input | 5V DC +/-5% |
Power Consumption | Depends on Configuration |
Software | |
Standard Support | Yocto Linux |
Extended Support | Commercial Linux |
Environmental and Mechanical | |
Dimensions | 37 x 40 mm |
Form Factor | PICO |
Relative Humidity | 10 to 90 % |
Operation Temperature | Commercial: 0° to +60° C, Industrial: -40° to +85° C |
Certification and Compliance | |
FCC | FCC ID: 2AKZA-QCA9377 |
IC | IC: 22364-QCA9377 |
CE | EN 300 328 v2.2.2, EN 301 893 v2.1.1, EN 55032 / EN 55024 |
TELEC (Japan) | TELEC: 201-180629 |
RCM (Australia/New Zealand) | RCM Compliant |