About EDM-G-IMX8M-PLUS
  • 16 Mar 2023
  • 1 Minute to read
  • Dark
    Light
  • PDF

About EDM-G-IMX8M-PLUS

  • Dark
    Light
  • PDF

Article summary

Introduction

The EDM-G-IMX8M-PLUS is a System on Module (SOM) based on an NXP i.MX8M Plus Quad core Cortex-A53™ + M7™ processor clocking up to 1.8GHz. It operates in both commercial and industrial temperature ranges from -40 to 85°C. The on-board Vivante GC GC7000Lite, OpenGL ES 3.0 supports Full HD HDMI, full-HD MIPI DSI display, 2-channel LVDS, and 2x MIPI-CSI2 Camera. With its built-in NPU, it can support up to 2.3 TOPS AI/ML acceleration. The EDM-G-IMX8M-PLUS is a member of the TechNexion “EDM-G pin-to-pin” product family, providing scalable embedded solutions with industrial interfaces such as Gigabit Ethernet, USB, I2S, UART, SPI, I2C, PWM, GPIO for sensors for IIoT edge devices. Accelerate your time-to-market and reduce development costs with TechNexion pre-certified FCC / IC / CE / RCM / TELEC dual-band Wi-Fi 802.11 ac/a/b/g/n, Bluetooth. Linux, Yocto, Android runtime images and full source code available.

EDM-G-IMX8M-PLUS
edm-g-imx8m-plus-top-cropped-w250

FeatureDescription
CPUNXP i.MX 8M Plus: Up to 4 × Cortex™-A53 1.8GHz 1 × Cortex™-M7
Memoryup to 8GB DDR4-2400
GPUVivante™ GC7000Lite (3D) and GC520L (2D)
DisplayHDMI, LVDS, MIPI DSI up to 1080p60
StorageeMMC up to 64GB, SD card (on baseboard)
NetworkEthernet: 10/100/1000 Mbps, WiFi: Certified 802.11 a/b/g/n/ac, Bluetooth: 5.0, BLE
RTCon baseboard
I2C3
SPI2
UARTsUp to 3
USB2x USB3.0 OTG
AudioUp to 2 I2S (SAI), PDM
Temperature RangeCommercial: (0 to 60C), Industrial (-40 to +85 C)
Dimensions35mm x 69.6mm

Visit product page on TechNexion website for:

  • Reference Manuals
  • Schematic and gerbers of our evaluation kits
  • Mechanical drawings

Software

TechNexion provides a selection of operating systems for EDM-G-IMX8M-PLUS including embedded Linux based on Yocto Project, Android, and Ubuntu.

Evaluation Kits

For more information regarding evaluation kits for EDM-G-IMX8M-PLUS, see our section on EDM-G Evaluation Kits.

General Technical Information

For general how-to information, including mechanical drawings, heatsink information, assembly tips, and more, to go: General Information on EDM-G products.


Was this article helpful?