Boot Configurations for PICO-WIZARD-IMX8M-MINI
  • 01 Oct 2021
  • 1 Minute to read
  • Dark
    Light
  • PDF

Boot Configurations for PICO-WIZARD-IMX8M-MINI

  • Dark
    Light
  • PDF

Below is a picture representation of the boot configuration jumper settings for PICO-IMX8M-MINI on our PICO-WIZARD baseboard. Configure the jumpers according to the boot selection you need.

Boot Configurations

There are three boot configuration settings: Boot from EMMC, Boot from microSD Card, and Serial Download Mode.

Note that on PICO-IMX8M-MINI, the default boot media is EMMC. On the module, we configure boot configuration signals to boot from the default media without needing to be pulled high or low on the baseboard. You can either leave the jumpers as set here, or remove them.

Boot from e.MMC

Mode Jumper Configuration
Boot from e.MMC pico-imx8m-wizard_emmc

Boot from SD Card

Mode Jumper Configuration
Boot from SD Card pico-imx8m-wizard_sd

Boot into Serial Download Mode

Mode Jumper Configuration
Serial Download Mode pico-imx8m-wizard_serial_download

Was this article helpful?

What's Next