Boot Configurations of PICO-PI-IMX8M-MINI
  • 21 Sep 2022
  • 1 Minute to read
  • Dark
    Light
  • PDF

Boot Configurations of PICO-PI-IMX8M-MINI

  • Dark
    Light
  • PDF

Article summary

Below is a picture representation of the boot configuration jumper settings for PICO-IMX8M-MINI on our PICO-PI baseboard. Configure the jumpers according to the boot selection you need.

Boot Configurations

There are two main boot configuration settings: Boot from EMMC, and Serial Download Mode. There is also an option to boot from MicroSD card on PICO-PI, via the included CLIX SD card adapter.

Note

PICO-IMX8M-MINI, the default boot media is EMMC. On the module, we configure boot configuration signals to boot from the default media without needing to be pulled high or low on the baseboard. You can either leave the jumpers as set here, or remove them.

Boot from e.MMC

ModeJumper Configuration
Boot from e.MMCPico-imx8m-pi-emmc

Boot from SD Card (on CLIX module)

ModeJumper Configuration
Boot from SD Card (on CLIX module)Pico-imx8m-pi_sd

Boot into Serial Download Mode

ModeJumper Configuration
Serial Download ModePico-imx8m-pi-serial-download-mode

Was this article helpful?